- Category: iOS
- Published on 28 April 2012
- Written by Thomas Hogarth
- Hits: 15977
What you'll need
- OpenSceneGraph Source (Available from the downloads section)
- XCode 4.3.2 with IPhone SDK 5.1 (Available from the OSX AppStore)
- CMake 2.8.8 (Available here http://www.cmake.org/cmake/resources/software.html)
Simulator or Device
When building for iOS you have to target either the Device or the Simulator. So before running CMake we need to edit the CMakeLists.txt file in the root of the OSG source. Open CMakeLists.txt search for OSG_BUILD_PLATFORM_IPHONE and you should find the following two lines
Set one of these to ON to buld for that platform then save the file. In the below example we would be building for device
So now we're ready to run CMake, fire it up and set the OSG source folder for the "Where is the source" and "Where to build the binaries" paths. Then hit configure and select XCode for the generator.
Platform SDK and Min Version
CMake uses the CMAKE_OSX_SYSROOT variable to know where the iOS sdk is located. OSG will automatically set this to/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.1.sdk
If you use a different sdk or your sdk is installed in a different location change CMAKE_OSX_SYSROOT to point to the correct location
You can also specify a different sdk number as the minimum requirement, this is set via the -miphoneos-version-min option in the CMAKE_CXX_FLAGS, by default this is set to 4.0. If using the CMake GUI you may need to tick 'Advanced' in order to see the CMAKE_CXX_FLAGS setting.
Specify Static Build
iOS requires that we link to OSG as a static library, so we must specify in CMake that we want OSG configured as a static library. To do this find and set the following options
GLES1 or GLES2
iOS devices from the 3GS onward support GLES1 and GLES2, the later supporting programmable shaders. In order to build one of these we must set the relevant options in CMake.
This is now the point that you should set any plugin library paths, it is recommended to at least add the freetype plugin for ttf font support. A universal iOS build of the freetype library is avaliable on Stephan Hubers IPhone git hub branch https://github.com/stmh/osg/tree/iphone/IPhone_Project/3rdParty
Applications and Examples
Currently OSGs CMake system (and I believe CMake in general) is not able to generate application targets. So it is recommended that you disable the generation of the OSG applications and examples by setting the following options to off.
If you leave either of these on the XCode project will still generate but the targets will produce errors when you try to build them in XCode.
Generate the XCode Project
You can now go ahead and 'Generate' your XCode project. Once this is done you should find a OpenSceneGraph.xcodeproj in your OSG source root.
You can now build OSG via the BUILD_ALL target or build each library individually.
Once opened you will see there are a lot of plugins, most of which you won't need at first, so it is recommended to create a new aggregate target. This will allow you to build a smaller selection of the targets with a single build command. To do this follow these steps:
-Select OpenSceneGraph project in the Project Navigator on the left
-Select Add new target
-Select "Aggregate" under the "Other" section and name it (I name it MinBuild to indicate it builds only the libs I need)
-Select the target from your targets list then in the 'Build Phases' section select add (+) and select the targets you require
I tend to select the followingOpenThreads osg osgUtil osgDB osgViewer osgGA osgText osgAnimation osgdb_osg osgdb_serializers_osg (for .osgt .osgb .osgx files) osgdb_serializers_osgAnimation (for osgAnimation in above files) osgdb_deprecated_osg (for .osg files) osgdb_deprecated_osgAnimation (for osgAnimation in .osg files) osgdb_freetype (for .ttf font support with osgText) osgdb_imageio (for image loading support)